Questo negozio utilizza i cookie e altre tecnologie in modo che possiamo migliorare la tua esperienza sui nostri siti. Ok
GLOBAL INVACOM GI FIBRE MDU OPTICAL OUTPUT LNB Visualizza ingrandito

GLOBAL INVACOM GI FIBRE MDU OPTICAL OUTPUT LNB

SKU-880

Nuovo prodotto

GLOBAL INVACOM GI FIBRE MDU OPTICAL OUTPUT LNB

 

The NEW GI FibreMDU Optical Output LNB radically changes how satellite IF signals are dealt with. The innovative new design stacks both the horizontal and vertical polarities then modulates this extented frequency, optically, using a Laser within the LNB.

An innovative new design Fibre LNB that converts 4 Universal IF bands, to a single optical output, capable of supplying 32 Virtual Converters over a 10 kilometre radius.

Powered seperatley the optical LNB takes the required
Fibre connection is made via a standard FC/PC connector feeding the distribution network on single mode fibre optic cable.

With an optical output of +7dBm the GI Fibre MDU Optical Output LNB is easily capable of driving up to 32 GI Fibre MDU converters located within a 10km radius.

Specifications

Input Frequency : 10.7 - 12.75 GHz linearly polarised (H/V)

Output Frequency : 950 MHz - 5.45 MHz lazer output at 1310nm

Optical Output Power : 7dBm nominal at 25.C +/-2dBm over full temperature range

Noise Figure Typical at 25°C 0.5dB

Max & Min Gain 72 - 62dB

Gain Ripple : The gain ripple per 26MHz bandwidth must be less than +/-0.5dB

Phase Noise 1 KHz -55dBc/Hz 10KHz -80dBc/Hz 100KHz -100dBc/Hz 1MHz -110dBc/Hz

Current Consumption : < 450mA

Image Rejection : 40dB min

Cross Polar Isolation : Typically 30dB, minimum 25dB

Spurious Output : (after recovering modulation) In band (950MHz-3GHz, 3.4GHz-5.45GHz) : -25dBc

Connectors F type and FC/PC

 

Maggiori dettagli

Questo prodotto non è più disponibile

Con l'acquisto di questo prodotto è possibile raccogliere fino a 16 Punti fedeltà. Il totale del tuo carrello 16 Punti fedeltà che può essere convertito in un buono di 3,20 €.


169,00 € Tasse incluse

Consegna: da 1 a 3 settimane

Sconti sul volume

QuantitàScontoSalva
3 4% Fino a 20,28 €

Dettagli

GLOBAL INVACOM GI FIBRE MDU OPTICAL OUTPUT LNB

 

The NEW GI FibreMDU Optical Output LNB radically changes how satellite IF signals are dealt with. The innovative new design stacks both the horizontal and vertical polarities then modulates this extented frequency, optically, using a Laser within the LNB.

An innovative new design Fibre LNB that converts 4 Universal IF bands, to a single optical output, capable of supplying 32 Virtual Converters over a 10 kilometre radius.

Powered seperatley the optical LNB takes the required
Fibre connection is made via a standard FC/PC connector feeding the distribution network on single mode fibre optic cable.

With an optical output of +7dBm the GI Fibre MDU Optical Output LNB is easily capable of driving up to 32 GI Fibre MDU converters located within a 10km radius.

Specifications

Input Frequency : 10.7 - 12.75 GHz linearly polarised (H/V)

Output Frequency : 950 MHz - 5.45 MHz lazer output at 1310nm

Optical Output Power : 7dBm nominal at 25.C +/-2dBm over full temperature range

Noise Figure Typical at 25°C 0.5dB

Max & Min Gain 72 - 62dB

Gain Ripple : The gain ripple per 26MHz bandwidth must be less than +/-0.5dB

Phase Noise 1 KHz -55dBc/Hz 10KHz -80dBc/Hz 100KHz -100dBc/Hz 1MHz -110dBc/Hz

Current Consumption : < 450mA

Image Rejection : 40dB min

Cross Polar Isolation : Typically 30dB, minimum 25dB

Spurious Output : (after recovering modulation) In band (950MHz-3GHz, 3.4GHz-5.45GHz) : -25dBc

Connectors F type and FC/PC

 

Recensioni

Scrivi una recensione

GLOBAL INVACOM GI FIBRE MDU OPTICAL OUTPUT LNB

GLOBAL INVACOM GI FIBRE MDU OPTICAL OUTPUT LNB

GLOBAL INVACOM GI FIBRE MDU OPTICAL OUTPUT LNB

 

The NEW GI FibreMDU Optical Output LNB radically changes how satellite IF signals are dealt with. The innovative new design stacks both the horizontal and vertical polarities then modulates this extented frequency, optically, using a Laser within the LNB.

An innovative new design Fibre LNB that converts 4 Universal IF bands, to a single optical output, capable of supplying 32 Virtual Converters over a 10 kilometre radius.

Powered seperatley the optical LNB takes the required
Fibre connection is made via a standard FC/PC connector feeding the distribution network on single mode fibre optic cable.

With an optical output of +7dBm the GI Fibre MDU Optical Output LNB is easily capable of driving up to 32 GI Fibre MDU converters located within a 10km radius.

Specifications

Input Frequency : 10.7 - 12.75 GHz linearly polarised (H/V)

Output Frequency : 950 MHz - 5.45 MHz lazer output at 1310nm

Optical Output Power : 7dBm nominal at 25.C +/-2dBm over full temperature range

Noise Figure Typical at 25°C 0.5dB

Max & Min Gain 72 - 62dB

Gain Ripple : The gain ripple per 26MHz bandwidth must be less than +/-0.5dB

Phase Noise 1 KHz -55dBc/Hz 10KHz -80dBc/Hz 100KHz -100dBc/Hz 1MHz -110dBc/Hz

Current Consumption : < 450mA

Image Rejection : 40dB min

Cross Polar Isolation : Typically 30dB, minimum 25dB

Spurious Output : (after recovering modulation) In band (950MHz-3GHz, 3.4GHz-5.45GHz) : -25dBc

Connectors F type and FC/PC

 

I clienti che hanno acquistato questo prodotto hanno anche comprato: